Motion Workspace
Horizontal Rotation
Ready
Motion Preview
90 deg in 1 sec
Loop
horizontal_rotation
Velocity Profile (V-T Graph)
Trapezoidal (Linear)Result Cards
Required Power
Net mechanical power required to drive the load. [Criteria]: Serves as the baseline for motor capacity (Watts) selection, used during peak power and thermal capacity evaluations.—W
Peak Torque
Maximum transient torque required during the profile (typically during acceleration). [Criteria]: Must be below the motor's Peak/Max Torque and within structural limits.—N·m
Required RPM
Peak motor-shaft speed reached during constant velocity. [Criteria]: Must be below the motor's Rated Speed and Max Speed. Used to verify gear ratio and cycle time feasibility.—RPM
RMS Torque
Root-Mean-Square (effective) torque over the duty cycle. [Criteria]: Must be below the motor's Rated/Continuous Torque to prevent thermal overload during continuous operation.—N·m
Safety Factor
Multiplier applied to calculated requirements to account for load variations and friction uncertainty. [Criteria]: Recommended >= 1.5 for horizontal motion, >= 2.0 for vertical motion.—x
Motor Grade
Smallest standard industrial motor grade satisfying the safety-factored requirement. [Criteria]: Used to determine the electrical power supply and drive size (e.g. 100W, 200W, 400W, 750W).—
Assumptions
No data
Warnings
No data